Data loggers
DL7 Case KIT
DL7 data logger in the shockproof case
DL7 data logger in the shockproof case
• Portable DL7 data logger
• Up to 6 I/O modules can be installed
• Supplying of sensors or transducers
• Up to 18 M12 connectors for connecting I/O signals
• M12 connector to connect the external power supply unit
• M12 connector for Ethernet port (option)
• M12 connector for RS-485 port (option)
• Tight closing of the housing lid, high protection class (IP67 for a closed case)
• The possibility of closing the housing with a padlock
DL7 Case KIT enables operating the DL7 data logger using storage batteries (from 1 up to 48 hours, depending on the number and types of installed I/O modules and numbers of battery packs) or operating the DL7 device using delivered external power supply unit and standby supplying in the event of voltage break (backup). The device enables supplying sensors or transducers connected to the recorder with using an external battery.
BASE SET AND AVAILABLE OPTIONS
A typical configuration of the set consists of: DL7 data logger, PS_BATT module (powered by 2×9.6 V 4000 mAh batteries), power supply unit, M12 plugs with screw connectors and a case. For the Ethernet port and RS-485 port optional connectors are available. Additional I/O modules are installed in accordance with the custom order.
There is a possibility of individual configuration of connectors location (also outside the case).
Detailed information about available modules can be found in the DL7 User’s Manual.
DL7 Case KIT doesn’t contain data logger.
It is only sold in a set with DL7.
This product is CE marked.
Declarations of Conformity are available on request.
| DL7 Case KIT | |
| Enclosure type and material | Case, polypropylene copolymer compound and mineral molecules |
| External dimensions (depth X width X length) | 36.0 cm X 30.4 cm X 19.4 cm |
| Connectors for electrical connections | · supply: M12, 1 piece
· I/O signals: M12, up to 18 pieces(1) · Ethernet: M12, 1 piece(1) · RS-485: M12, 1 piece(1) |
| Electrical connection (M12 connector) | Diameter of the cable: 4 .. 8 mm
Cross section of connecting wires: 1.5 mm2 |
| Weight | Ca. 5.5 kg |
| Protection class(2) | · Closed case: IP67
· Open case: IP54 |
| Recharge time (storage battery fully charged) | Ca. 12 h |
| (1) The number of installed connectors depends on the device configuration (in accordance with the order).
(2) Protection class is given for the standard position of the connectors (all connectors inside the case). |
|
| Environmental conditions | |
| Ambient temperature | 0 .. +50 °C or 0 .. +40 °C
depends on the device hardware configuration(3) |
| Storage temperature | -30 .. +70 °C |
| Operating location | Indoor or outdoor(4) |
| (3) If module IN6I(24V) or IN2RS485(24V) installed and operating as a power supply source for external devices, ambient temperature is limited to 0 .. +40 °C. In all other configurations the ambient temperature range is 0 .. +50 °C.
(4) If additional protection against atmospheric precipitation is provided (roofing), the device can be operated outdoor. |
|
DL7 data logger in the shockproof case
• Portable DL7 data logger
• Up to 6 I/O modules can be installed
• Supplying of sensors or transducers
• Up to 18 M12 connectors for connecting I/O signals
• M12 connector to connect the external power supply unit
• M12 connector for Ethernet port (option)
• M12 connector for RS-485 port (option)
• Tight closing of the housing lid, high protection class (IP67 for a closed case)
• The possibility of closing the housing with a padlock
DL7 Case KIT enables operating the DL7 data logger using storage batteries (from 1 up to 48 hours, depending on the number and types of installed I/O modules and numbers of battery packs) or operating the DL7 device using delivered external power supply unit and standby supplying in the event of voltage break (backup). The device enables supplying sensors or transducers connected to the recorder with using an external battery.
BASE SET AND AVAILABLE OPTIONS
A typical configuration of the set consists of: DL7 data logger, PS_BATT module (powered by 2×9.6 V 4000 mAh batteries), power supply unit, M12 plugs with screw connectors and a case. For the Ethernet port and RS-485 port optional connectors are available. Additional I/O modules are installed in accordance with the custom order.
There is a possibility of individual configuration of connectors location (also outside the case).
Detailed information about available modules can be found in the DL7 User’s Manual.
DL7 Case KIT doesn’t contain data logger.
It is only sold in a set with DL7.
This product is CE marked.
Declarations of Conformity are available on request.
| DL7 Case KIT | |
| Enclosure type and material | Case, polypropylene copolymer compound and mineral molecules |
| External dimensions (depth X width X length) | 36.0 cm X 30.4 cm X 19.4 cm |
| Connectors for electrical connections | · supply: M12, 1 piece
· I/O signals: M12, up to 18 pieces(1) · Ethernet: M12, 1 piece(1) · RS-485: M12, 1 piece(1) |
| Electrical connection (M12 connector) | Diameter of the cable: 4 .. 8 mm
Cross section of connecting wires: 1.5 mm2 |
| Weight | Ca. 5.5 kg |
| Protection class(2) | · Closed case: IP67
· Open case: IP54 |
| Recharge time (storage battery fully charged) | Ca. 12 h |
| (1) The number of installed connectors depends on the device configuration (in accordance with the order).
(2) Protection class is given for the standard position of the connectors (all connectors inside the case). |
|
| Environmental conditions | |
| Ambient temperature | 0 .. +50 °C or 0 .. +40 °C
depends on the device hardware configuration(3) |
| Storage temperature | -30 .. +70 °C |
| Operating location | Indoor or outdoor(4) |
| (3) If module IN6I(24V) or IN2RS485(24V) installed and operating as a power supply source for external devices, ambient temperature is limited to 0 .. +40 °C. In all other configurations the ambient temperature range is 0 .. +50 °C.
(4) If additional protection against atmospheric precipitation is provided (roofing), the device can be operated outdoor. |
|